Home
     Products
     Quality Control
     Packaging
     Downloads
     Ordering
     Contact SLM

Products
List of Micropipettes ICSI Injection Pipettes


  • ICSI Injection Pipettes are used to perform intracytoplasmic sperm injection (ICSI).
  • The unique shape and taper of our ICSI pipettes provide for smooth movement of its content. A few sperm can be loaded for injecting a few oocytes at one time. The short and sharp fine spike at the tip allows for easy, non- traumatizing penetration of oocyte.
  • Three groups are available for selection: 45V, 50V and 55W. The 50V series is our classic design with ID 5 μm, tip bevel 30° and spiked. The 45V series is a smaller version of 50V with ID 4.5 μm. The 55W series has an ID 55 μm, tip bevel 40° and spiked.
  • All our injection pipettes are supplied with an angle of 20°, 30° or 35° with a tip to elbow length of 550 μm.
  • Sold in a box of 10.
Ordering Information

Catelogue Number Outer Diameters μm Inner Diameters μm Tip Bevel Degrees Tip Angle Degrees
SIC-45V-20 6 4.5 30 20
SIC-45V-30 6 4.5 30 30
SIC-45V-35 6 4.5 30 35
SIC-50V-20 7 5.0 30 20
SIC-50V-30 7 5.0 30 30
SIC-50V-35 7 5.0 30 35
SIC-55W-20 7 5.5 40 20
SIC-55W-30 7 5.5 40 30
SIC-55W-35 7 5.5 40 35
back to top

Holding Pipettes


  • Holding Pipettes are used to hold an oocyte or embryo in position during ICSI and other micromanipulation procedures.
  • There are two series and four sizes for selection. The classic series has an ID 20 μm. and OD in 90 μm., 100 μm. and 120 μm. The 'B' series has an ID 28 μm. and OD in 120 μm. and 130 μm.. The 'B' series is designed for holding oocyte with cumulus cells attached.
  • All our holding pipettes are supplied with a tip angle of 20°, 30° or 35° with a tip to elbow length of 650 μm.
  • Sold in a box of 10.
Ordering Information

Catelogue Number Outer Diameters μm Inner Diameters μm Tip Angle Degrees
SHP-90-30 90 20 30
SHP-100-20 100 20 20
SHP-100-30 100 20 30
SHP-100-35 100 20 35
SHP-120-20 120 20 20
SHP-120-30 120 20 30
SHP-120-35 120 20 35
SHP-120B-20 120 28 20
SHP-120B-30 120 28 30
SHP-120B-35 120 28 35
SHP-130B-30 130 28 30

back to top

Zona Drilling Pipettes


  • Zona Drilling Pipettes are used to apply acidic solution for creating a hole on the zona pellucida to enable assisted hatching and/or embryo biopsy.
  • There are two sizes available for selection: ID 8-10 μm and ID 10-12μm. These pipettes are designed with a slightly fire-polished tip.
  • They are supplied with 30° tip angle and a tip to elbow length of 550 μm.
  • Sold in a box of 10.
Ordering Information

Catelogue Number Outer Diameters μm Inner Diameters μm Tip Angle Degrees
SZD-10-30 8-10 Flat 30
SZD-12-30 10-12 Flat 30

back to top

Polar Body Biopsy Pipettes


  • Polar Body Biopsy Pipettes are used to remove polar bodies from human oocyte and embryo for preimplantation genetic diagnosis (PGD).
  • There are three series of pipette available for selection: 15Z (flat tip), 15X (beveled tip) and 15S (spiked tip).
  • All these pipettes are designed with fire polished edge to avoid damage to cell membrane.
  • They are supplied with a tip angle of 30° and a tip to elbow length 550 μm.
  • Sold in a box of 10.
Ordering Information

Catelogue Number Inner Diameters Tip Style Tip Angle Degrees
SPB-15Z-30 13-15 Flat 30
SPB-15X-30 13-15 Beveled 30
SPB-15S-30 13-15 Beveled and Spiked 30

back to top

Partial Zona Dissection(PZD) Pipettes


  • PZD Pipettes are used to cut an opening on the zona pellucida of an oocyte mechanically to enable assisted hatching and/or embryo biopsy.
  • The pipette is designed with a very sharp tip and a strong taper section for easy control and precision manipulation.
  • They are supplied with a 30° tip angle and a tip to elbow length 550 μm.
  • Sold in a box of 10.
Ordering Information

Catelogue Number Description Tip Angle Degrees
SPD-30 PZD Pipette 30

back to top

Blastomere Biopsy Pipettes


  • Blastomere Biopsy Pipettes to remove blastomeres from embryos for preimplantation genetic diagnosis (PGD).
  • There are three sizes and two series available for selection. The 'Z' series is flat tip and the 'X' series beveled tip. Both styles are supplied with ID 30 µm, 35 µm and 40 µm. All tips are fire polished to reduce damage to cell membrane.
  • They are supplied with a tip angle of 30° and a tip to elbow length of 550 μm.
  • Sold in a box of 10.
Ordering Information

Catelogue Number Tip Style Inner Diameters μm Tip Angle Degrees
SBB-30Z-30 Flat 30 30
SBB-35Z-30 Flat 35 30
SBB-40Z-30 Flat 40 30
SBB-30X-30 Beveled 30 30
SBB-35X-30 Beveled 35 30
SBB-40X-30 Beveled 40 30

back to top

  www.sunlight-medical.com Sunlight Medical Inc. ©1999-2009 All rights reserved.